Palisade Wall Set

View this project on Kickstarter
Miniature gaming terrain Palisade Wall Set. Made for 25/28 mm figures. These are unpainted resin walls for gaming.
  • Funding Breakdown
  • Goal $1,000.00
  • Total Pledged $265.00
  • Backers 8
  • Pledge Rewards $240.00
  • Addons & Shipping $25.00
  • Avg. per Backer $33.13
  • Rank 11851 of 13302
  • Rewards
  • Reward Levels 15
  • Lowest Level $4.00
  • Highest Level $500.00
  • Most Popular
    Pledge $25.00 or more
    1 of 50 backers
    This is a single unpainted resin gate section. With the wall, walkway and two uprights. When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall.

  • Pledge $1.00 or more
    0 backers
    No Reward
    Pledge $4.00 or more
    0 backers
    This is a single unpainted resin. This item is approximately 4 inches (100mm) long, 0.75 inches (20mm) wide, and 0.25 inches (6.5 mm) tall.
    Pledge $5.00 or more
    0 backers
    This is a 1 unpainted resin wall section. Just the wall, and that is it. This is approximately 4 inches (100mm) long, 0.25 inches (5mm) wide, and 4 inches (100 mm) tall.
    Pledge $8.00 or more
    0 backers
    This is a single unpainted resin and requires assembly Corner wall section. With the left and right wall, walkway and two uprights. When assembled the Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall.
    Pledge $10.00 or more
    0 backers
    This is a single unpainted resin wall section. With the wall, walkway and two uprights. When assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.
    Pledge $15.00 or more
    0 backers
    This is a single unpainted resin and requires assembly Corner wall section. With the left and right wall, walkway and three uprights. When assembled the Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall.
    Pledge $20.00 or more
    0 backers
    This is a 6 unpainted resin wall section. Just the wall, and that is it. This is approximately 24 inches (610mm) long, 0.25 inches (5mm) wide, and 4 inches (100 mm) tall.
    Pledge $25.00 or more
    1 of 50 backers
    This is a single unpainted resin gate section. With the wall, walkway and two uprights. When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall.
    Pledge $30.00 or more
    1 backers
    Includes 3 wall sections and One Sally port door Wall section. When Fully assembled Quarter-a-Fort is approximately 16 inches (405mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall.
    Pledge $50.00 or more
    0 backers
    This is a 12 unpainted resin wall section. Just the wall, and that is it. This is approximately 48 inches (1220mm) long, 0.25 inches (5mm) wide, and 4 inches (100 mm) tall.
    Pledge $60.00 or more
    1 backers
    Includes 8 wall sections and One Sally port door Wall section. Plus, two Corners with walkways. When Fully assembled Half-a-Fort is approximately 21 inches (535 mm) long, 10 inches (250mm) wide, and 4 inches (100 mm) tall.
    Pledge $125.00 or more
    1 of 25 backers
    Includes 16 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways. When Fully assembled Full Fort is approximately 25 inches (545 mm) long, 25 inches (545 mm) wide, and 4 inches (100 mm) to 6 (150 mm) tall.
    Pledge $150.00 or more
    0 of 15 backers
    Includes 17 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways. One Sally Port Wall section. Two Outside Corners with walkways. May different ways to set up this set. Basic Wall Section assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. Sally Port Door Wall Section is 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. Long Wall Section is 5 inches (125mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall. Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall. Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall.
    Pledge $200.00 or more
    0 of 4 backers
    Includes 8 wall sections and One Sally port door Wall section. Plus, two Corners with walkways. All Sections are painted and based. When Fully assembled Half-a-Fort is approximately 21 inches (535 mm) long, 10 inches (250mm) wide, and 4 inches (100 mm) tall.
    Pledge $400.00 or more
    0 of 2 backers
    Includes 16 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways. All Sections are painted and based. When Fully assembled Full Fort is approximately 25 inches (545 mm) long, 25 inches (545 mm) wide, and 4 inches (100 mm) to 6 (150 mm) tall.
    Pledge $500.00 or more
    0 of 1 backers
    Includes 17 wall sections, One Long wall section, and One Main Gate. Plus, four Corners with walkways. One Sally Port Wall section. Two Outside Corners with walkways. All Sections are painted and based. May different ways to set up this set. Basic Wall Section assembled this is approximately 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. Sally Port Door Wall Section is 4 inches (100mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. Long Wall Section is 5 inches (125mm) long, 1.25 inches (30mm) wide, and 4 inches (100 mm) tall. When assembled this is approximately the Main Gate Section is 5 inches (125mm) long, 2.25 inches (60mm) wide, and 6 inches (150 mm) tall. Corner Section is 2 inches (50mm) long, 2 inches (50 mm) wide, and 4 inches (100 mm) tall. Outside Corner Section is 3.25 inches (80mm) long, 3.25 inches (80 mm) wide, and 4 inches (100 mm) tall.

Historical Data

Date Backers Pledged Comments Updates
Mar 10 1 $35.00 2 0
Mar 11 2 $36.00 2 0
Mar 12 3 $37.00 2 1
Mar 13 3 $37.00 2 1
Mar 15 4 $167.00 2 1
Mar 16 4 $167.00 2 1
Mar 17 4 $167.00 2 1
Mar 19 6 $199.00 2 1
Mar 20 6 $199.00 2 1
Mar 21 6 $199.00 2 1
Mar 22 6 $199.00 2 1
Mar 23 6 $199.00 2 1
Mar 25 6 $199.00 2 1
Mar 26 6 $199.00 2 1
Mar 27 6 $199.00 2 1
Mar 28 6 $199.00 2 1
Mar 30 6 $199.00 2 1
Mar 31 6 $199.00 2 1
Apr 2 6 $199.00 2 1
Apr 3 7 $200.00 2 1
Apr 5 7 $200.00 3 1
Apr 6 7 $200.00 3 1
Apr 8 8 $265.00 4 1
Apr 9 8 $265.00 4 1
Content courteously provided by Kickstarter and the respective project owner. BoardGameData.com is not affiliated with Kickstarter in any way.